Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Union City
Dryer vent cleaning in Union City typically costs $140 to $260 for a full system clean, and most homes off Alvarado Boulevard or in the 94587 flats can be scheduled within a week. We work across both Union City ZIP codes, 94536 and 94587, and our techs know the difference between a 1950s stucco home with original galvanized runs and a 1980s hillside tract with flex duct in the attic. If your dryer is taking two cycles to finish a load or the laundry room feels warmer than it should, call (866) 528-3938 for a free estimate. Dave Hanson built Duct Cleaning Mountain View around a simple idea: use professional-grade equipment, inspect before you clean, and show the customer what you found.
Why Duct Cleaning Mountain View Is Union City’s Preferred Dryer Vent Cleaning Company
Union City homeowners call us because we arrive with Rotobrush and Nikro cleaning systems, not a shop vacuum and a leaf blower. There’s a difference, and it shows in the result. Our techs run camera inspections on nearly every dryer vent job in Union City because crushed flex runs and lint-packed wall chases hide behind laundry walls, especially in the older Decoto and Alvarado neighborhoods. We’ve pulled years of packed lint from galvanized runs under negative pressure, and we’ve replaced disconnected joints that homeowners never knew existed. When we clean a dryer vent, the HEPA containment equipment from Abatement Technologies stays running, so the lint we dislodge doesn’t blow back into your laundry room or crawlspace. You get a before-and-after photo set of your own vent, not a stock image.
Our Dryer Vent Cleaning team covers Union City from the flats near Decoto Road up to the tract subdivisions east of Mission Boulevard. We know where the long horizontal vent runs are common and where exterior hoods terminate under decks or in tight side yards. That local pattern recognition means fewer surprises on the job and an accurate quote before we start.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Dryer Vent Repair in Union City
Dryer Vent Repair in Union City frequently means more than clearing lint. In the 94587 flats, we regularly find original flex runs that have been crushed almost flat behind laundry walls, compressed by years of heat and house settling. A crushed run is not a cleaning problem; it’s a repair, and no amount of brushing will fix it. We replace damaged flex sections with rigid metal, reconnect taped joints that have separated, and clear packed lint from wall chases where the old duct disconnected. On a 1950s stucco home off Alvarado Boulevard, our tech used a camera to find a flex run compressed behind the laundry wall, then ran a Rotobrush whip and agitation tools through the full pathway under negative pressure. After replacing the crushed section with rigid metal and clearing a nest of lint from the exterior hood, airflow came back to normal. That job ran $220 including the repair.
Crushed and Disconnected Flex Runs
Homes built before the 1980s in Union City’s flatland neighborhoods often have dryer vent runs that were installed with minimal support. Over decades, the flexible duct sags, kinks, or disconnects at the joint. You might see longer dry times or a burning dust smell. We scope the run with a camera, identify the exact failure point, and repair it with rigid metal that holds its shape.
Exterior Hood Blockage and Lint Nests
In Union City’s dense flatland lots, dryer vents often terminate under decks or in narrow side yards where the exterior hood collects lint, leaves, and occasionally bird nests. A clogged hood reduces airflow even if the interior run is clear. We clear the full run to the hood and check the damper flap, replacing vent caps when the housing is cracked or the flap no longer seals. Typical hood cap replacement in Union City adds $45 to $85 to the job.
Dryer Vent Cleaning Company in Union City
A Dryer Vent Cleaning Company in Union City should do more than vacuum the first three feet behind the dryer. Our process covers the entire run: from the dryer connection, through the wall, across any crawlspace or attic section, to the exterior hood. In Union City’s marine-influenced air, lint accumulates slower than it does in Tracy or Livermore, but moisture hangs around. That combination means lint inside the vent stays damp longer, sticks to duct walls, and forms a paste-like layer that a consumer brush can’t remove. We run Rotobrush agitation tools through the full pathway under negative pressure, with Abatement Technologies HEPA filtration capturing what comes off the walls instead of recirculating it into your laundry room.
Full-Run Cleaning With Camera Verification
We inspect the run before and after cleaning with a camera, so you see the condition of your duct, not just a verbal summary. If the run is disconnected, crushed, or filled with nesting material, we flag it and quote the repair separately before doing anything. In older Union City homes, that discovery step matters. Original galvanized ducts with taped joints often fail behind walls, and a simple vacuum-out would leave the real problem untouched.
Bird Guard and Vent Cap Installation
Union City’s neighborhoods with mature trees see more bird and rodent activity around exterior dryer hoods. We install bird guards and replacement vent caps with proper dampers to keep pests out and airflow steady. A standard vent cap replacement runs $45 to $85. A bird guard installation adds $35 to $60.
Trusted Brands We Service in Union City
Union City homeowners don’t need us to explain every brand on the market. They want to know what we run and what we trust. We use Rotobrush and Nikro professional cleaning systems on every job, with Abatement Technologies HEPA filtration keeping contaminants out of the air. For homeowners who want cleaner air to stay that way, we also supply Honeywell and Aprilaire air quality products. If you’re in Union City and your dryer vent cleaning reveals deeper duct problems, we stock the common rigid metal sections, connectors, and replacement caps our techs need for same-visit repairs. No ordering parts and waiting a week.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Union City Homes
- Damp lint stuck to duct walls. The marine fog that rolls into Union City keeps attic and crawlspace air moist, so lint inside dryer vent runs turns into a paste that adheres to galvanized metal. Consumer brushes slide over it. Rotobrush agitation under negative pressure pulls it out.
- Crushed flex runs and disconnected joints. In pre-1960s stucco homes around Decoto and Alvarado, original flex sections sag and kink behind laundry walls. We’ve seen runs compressed nearly flat. They need replacement, not just cleaning.
- Exterior hoods buried under decks. Many 94587 flatland lots have dryer vents terminating under decks or in crowded side yards where lint and debris collect fast. A hood that can’t vent properly makes the whole run work harder.
- Fogging ‘sanitiser’ residue masking real problems. Damp Decoto flats sometimes get a fogging service that sprays a deodorizer into the vent. It smells good for a week. It doesn’t remove the disconnected joint or crushed run behind the wall that’s actually causing the moisture and odor. Source removal is what works.
Pricing for Dryer Vent Cleaning in Union City, CA
Dryer vent cleaning in Union City runs $140 to $260 for a standard single-story home with a straight or moderately long vent run. Two-story homes and runs that travel through multiple wall chases or across an attic run $190 to $320. Camera inspection is included in the cleaning price, not an add-on. Repairs are quoted separately before any work starts: crushed flex replacement adds $80 to $160 depending on access, rigid metal conversion starts at $120, and hood or cap replacement runs $45 to $85. We don’t do per-vent pricing and we don’t run a low teaser price that balloons once the van is in your driveway. One flat price per system, agreed before we start. Call (866) 528-3938 for a free estimate, and you’ll get the number on the phone.
We Also Serve Cities Near Union City
Beyond Union City, our dryer vent cleaning and repair routes cover Newark to the southwest, Mountain View and Palo Alto across the bay corridor, and San Carlos up the peninsula. If you manage rental properties across multiple East Bay cities, we can schedule several units in one route. Call (866) 528-3938 and ask for Dave Hanson.
Serving Union City, CA – Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Union City
Because many Decoto flats were built before 1960 with original galvanized duct runs and flex sections that have taped or disconnected joints, crushed sections behind walls, and long horizontal runs that were never properly supported. A cleaning removes the lint; it doesn’t fix a duct that has separated from the wall connection or collapsed. If your dryer takes twice as long to dry a load in a 94587 home, there’s a good chance the problem is structural. We inspect with a camera first, show you what we find, and quote the repair separately. Call (866) 528-3938 to schedule an inspection.
It makes the dampness problem worse, not the lint volume. Union City’s marine-influenced air keeps attics and crawlspaces moist, so lint inside dryer vent runs absorbs that moisture and forms a sticky paste on duct walls. In hot inland cities, lint stays dry and granular. In Union City, it clings and builds up in layers. Cleaning removes that layer before it hardens into a blockage. If you’re in a damp flatland home or near the Hayward border, an annual check is reasonable. For hillside tract homes in 94536 with shorter runs, every 18 to 24 months works.
A real cleaning removes the source of the problem: packed lint, disconnected joints, and crushed runs. A fogging service sprays a deodorizer into the vent, which masks odor for a week and does nothing about the lint or the moisture. In damp Decoto flats, fogging is especially misleading because it makes the laundry room smell fresh while a disconnected joint behind the wall keeps pulling moist air through. We’d rather show you a camera image of the actual run. That’s the difference between removing source material and spraying perfume on it.
Every 18 to 24 months for most 94536 hillside tract homes. These houses are younger, built from the 1970s through 2000s, with shorter flex runs that don’t accumulate lint as fast as the long horizontal runs in older flats. The bigger risk in hillside homes is animal intrusion, since attics and exterior hoods near open space see more rodent and bird activity. A visual check of the exterior hood once a year is enough for most. Call (866) 528-3938 for a free estimate if you’re not sure when your last cleaning happened.
We follow NADCA’s procedural standards for source removal and system cleanliness on every dryer vent cleaning, including the negative-pressure containment approach and camera verification. NADCA is the trade reference for HVAC system cleaning, and its standard informs how we run Rotobrush agitation, Abatement Technologies HEPA filtration, and post-clean inspection. Whether your Union City home needs a simple full-run cleaning or a repair that goes beyond the vent, the process is documented and photographed. Call (866) 528-3938 to ask Dave Hanson about the specifics.
Written by Dave Hanson, Owner at Duct Cleaning Mountain View, serving Union City and the surrounding East Bay.